KOJO WPC Products Maintenance Guide: Scientific Maintenance to Extend Service Life

WPC materials have become the first choice for modern homes because of their environmental protection and durability, but scientific maintenance is still needed to maintain their beauty and functionality for a long time. The following analyzes the maintenance points of KOJO WPC doors and furniture from the dimensions of daily cleaning, environmental adaptation and problem repair.

First, daily cleaning: simple operation to maintain a smooth surface.

The surface of KOJO WPC products adopts weather-resistant coating technology of PUR, which is superior to traditional materials in pollution resistance. Daily use only a soft cloth dipped in neutral detergent (such as diluted detergent) to wipe, to avoid scratching with hard tools such as steel balls. For the oil contaminated by WPC cupboard doors in the kitchen, 75% alcohol can be sprayed to dissolve the oil and wipe it off; For the water stain of the WPC door in the bathroom, it is recommended to use a dry cloth to absorb the water in the joint every week to prevent soap scale from accumulating. Special attention should be paid to: strong acid and strong alkali cleaners are prohibited to avoid damaging the surface thermal transfer decorative layer.

Second, environmental adaptation: dynamic adjustment of temperature and humidity

Although KOJO WPC products are waterproof and moistureproof (water absorption rate < 0.5%), extreme environment should be avoided:

High-temperature and dry areas (such as underground heating rooms and desert climate): regularly wipe the surface with a wet cloth to prevent the material from shrinking slightly due to excessive drying;

High humidity confined space (such as windowless bathroom): keep ventilation for 30 minutes every day after installation, and dehumidifier can be used in long-term humid environment;

Direct ultraviolet area (such as balcony door): It is suggested to install a shade or use special protective wax for WPC maintenance every six months to slow down ultraviolet aging.

Third, the use of taboo: to avoid the risk of physical damage

The density of KOJO WPC door core material is 1.3g/cm³, and its impact resistance is better than that of ordinary wood. However, it should be noted that:

Avoid scratching the door leaf with sharp objects (such as keys and knives);

Hanging heavy objects requires a special hook behind the door, and it is forbidden to directly nail screws;

The bearing capacity of furniture should meet the design standards (for example, the weight limit of wardrobe laminate is 50kg), and overload may easily lead to structural deformation.

Fourth, regular maintenance: guarding details to extend life.

It is recommended to conduct a systematic inspection once every quarter:

1. Hardware maintenance: rust lubricant is sprayed on hinges and slide rails to prevent oxidation jamming;

2. Inspection of sealing strip: Measure the gap between the doors with a soft ruler. If it exceeds 3mm, adjust the door frame or replace the sealing strip;

3. Structural stability test: Shake the door/cabinet gently. If it shakes, tighten the expansion screw immediately or contact the after-sales department.

Five, damage repair: grading treatment to restore beauty.

Take corresponding measures according to different damage degrees:

Slight scratch: use 2000 mesh sandpaper to polish along the grain, and then apply the same color WPC repair paste;

Local depression: heating the deformed area to 60℃ for softening, and flattening it with a heavy object for 24 hours;

Severe cracking: contact KOJO official after-sales, and quickly replace damaged parts through modular design to avoid scrapping the whole door.

The long life (more than 20 years) of KOJO WPC products not only comes from cutting-edge technology, but also depends on scientific maintenance. Through simple and easy cleaning habits, environmental adaptation and preventive maintenance, users can maximize their environmental protection value. As a 100% recyclable material, KOJO provides core recycling service even if the product reaches its service life, which truly realizes the green closed loop of the whole cycle from production, use to regeneration. Choosing KOJO means choosing a rational and sustainable lifestyle.