How To Install Wood Plastic Doors

The wood-plastic door is made by mixing ultrafine wood powder and polymer resin through a molding process. The main material of the wood-plastic door is PVC resin and wood powder. Therefore, the wood-plastic door has the advantages of wood and plastic. The fidelity of its imitation wood effect is difficult to distinguish, and it is a new green material that replaces traditional wood.

The main raw materials of wood-plastic doors are PVC resin and fine wood powder, which are classified, screened, ground, dried, and coated to ensure the quality of raw materials for the finished product. The wood-plastic door formula system is equipped with a certain proportion of auxiliary materials, adding stabilizers, foaming agents, modifiers, etc., and various ingredients are mixed in strict proportions to ensure the product quality of the foamed board.

Waterproof, moisture-proof, anti-corrosion, anti-mildew, anti-moth, and non-deformation wood-plastic products have the dual characteristics of wood and plastic, so wood-plastic suit doors are especially suitable for large temperature differences, humidity, and poor ventilation, except for indoor doors. Places, such as damp toilets, need anti-corrosion, anti-mildew, and anti-moth storage rooms.

The following explains the installation steps of wood-plastic doors for everyone

1. First draw a vertical line on the door opening.

2. Fix the appropriate liner on the door hole as required.

3. Fix the vertical sleeve on one side of the hinge, and measure the verticality up and down when fixing.

4. Place the vertical sleeve and horizontal sleeve on the other side.

5. Install the door on the vertical sleeve, and pay attention to the gap when installing.

6. Close the door, and fix the vertical sleeve on the other side of the door seam as required.

7. Fix the upper horizontal sleeve.

8. Install right angle lines inside and outside.

9. Glue strips, door locks, and lock plates.

10. Test, check.